HANSUN Industry information


We are a professional Yantai crusher manufacturer, many customers reflect that when using, because the method is not correct, the hammer often breaks down, and seriously affects the service life of the product. Here we will take you to learn: the correct use of crushing hammer.
1. Read the operation manual of crushing hammer carefully, master the correct operation method, prevent damage to crushing hammer and excavator loader, and operate them efficiently and safely.
2. Before operation, check whether the bolt and connector are loose, and whether the hydraulic pipeline has leakage.
3. Yantai hammer manufacturers remind you not to use the hammer to peck holes in hard rock, and do not operate the crusher under the condition of full extension or contraction of piston rod of hydraulic cylinder.
4. The excavator must be placed stably, so as to reduce the shaking of the excavator as much as possible, so as to improve the accuracy of hammering.
5. When hammering a stone, think about the next target and find the next hammer surface
6. When the hydraulic hose vibrates violently, stop the operation of the crusher and check the pressure of the accumulator.
7. Prevent the interference between the boom of the excavator and the bit of the crusher. Do not immerse the crusher in water.
8. It is not allowed to use the crusher as a lifting device or operate the crusher on the tire side of the excavator.
The above is the correct use method introduced by Yantai crushing hammer manufacturer. When using, it is also necessary to select the appropriate type of products according to the use requirements, so as to effectively reduce the occurrence of faults